1920_300px;
产品
当前位置:首页>产品>产品中心
DGC型磁力驱动多级离心泵
编辑: 更新于:2014-7-31 13:56:23 阅读:



型号意义 


  结构说明 Description of structure

  1.卧式径向剖分,外壳为筒袋形结构,内壳为节段式结构。
  1. Horizontal radial split, the outer volute in cylindrical bag structure, and inner volute in section structure.

  2.大功率磁力驱动、全密封、无泄漏,无污染。
  2. High power magnetic driving, fully enclosed,no leakage and no contamination.

  3.双层壳体保护,较好地解决了泵在高温工况下的热冲击和高压时的翘曲变形,绝对安全无泄漏。
  3.Double layer volute protection, well solving the problem of buckling deformation of pump under heat impact and high pressure, and ensuring absolute safety and freedom of leakage.

  4.根据介质温度选用底脚支承(基本型)和中心支承(高温型)。
  4.Foot support (basic type) and central support (high temperature type) can be selected according to medium temperature.

  5.轴向力由平衡鼓、平衡盘、滑动止推轴承和磁传动器藕合力协调平衡。
  5. The axial load is coordinated and balanced by the balance drum, balance disc, sliding thrust bearing and magnetic drive coupling force.

  6.泵的入口可水平、垂直或侧向任意角度布置,泵的出口可垂直或侧向任意角度布置。
  6.The pump inlet can be arranged horizontally, vertically or at any angle on lateral side, and the pump discharge can be arranged vertically or at any angle on lateral side.

  7.可选用与电机直连或带膜片联轴器两种结构。
  7. Two structures are available: direct connection with motor or connection via diaphragm coupling.

  8.过流部件的材质可根据所输送物料的特性,做出相应的选择。
  8. The materials of the flow passage components can be selected accordingly according to the properties of the materials conveyed. 



标准性能表Standard performance parameters



Copyrights ©  版权所有:兰州海兰德泵业有限公司 陇ICP备10002898号 设计制作 宏点网络
300_200px;
推一把28推百度