1920_300px;
产品
当前位置:首页>产品>产品中心
CYQ型磁力驱动液化石油气泵
编辑: 更新于:2014-7-31 13:55:39 阅读:

                     


 

  结构说明 Description of structure   

  1.全密封、无泄漏,完全避免了输送中的不安全因素。
  Fully enclosed and free of leakage, completely avoiding unsafe factors in conveying.

  2.吸入口水平,出口垂直向上。
  The suction is in horizontal position and the discharge is vertical upward.

  3.当出口管路系统压力超出已设定的额定压力时,安全阀自动打开,液体在泵内循环,确保系统安全,安全阀的工作压力应在泵的额定压力范围内根据实际需要设定。
  When the outlet piping system pressure exceeds the set rated pressure, the relief valve will open automatically, to allow liquid to circulate inside the pump, to ensure system safety; the working pressure of the relief valve should be set according to actual need within the rated pressure range of the pump.

  4. CYQ60-3.6和CYQ45-3.6型泵和奥氏体不锈钢材质的泵不带内置安全阀,用户必须在泵的进出口之间设置旁通回路,加装安全阀。
  Pumps of model CYQ60-3.6 and CYQ45-3.6 and made of Austenite stainless steel have no built-in relief valve, so users must set up a bypass circuit between the pump inlet and discharge, and mount a relief valve on it.

  5.该型泵能够适应低汽蚀余量的场合,实现气液混输。
  This type of pump can be used in applications with low NPSH, to realize conveying of gas-liquid mixture.

  泵常用材料  Common pump materials 


标准性能表 Standard performance parameters


备注:通过改变泵的材质,可提高泵的入口压力至2MPa以上,以用于输送挥发性较强的丙烷、液氨等。

Copyrights ©  版权所有:兰州海兰德泵业有限公司 陇ICP备10002898号 设计制作 宏点网络
300_200px;
推一把28推百度